We are still safely, delivering great value rope access services as per Government guidelines, with strict measures in place to keep our staff and customers safe. We are available on the phone or online, please view our latest updates and Covid-19 statement here.
Anchors -Installing and Testing
For all the projects that are undertaken by our company, we are fully certified and trained to install a wide range of safety systems.
Installation and Comprehensive Test & Inspection for Abseil Anchors and Eyebolts.
London Professional Abseiling Ltd aims to deliver the best installation, test, and inspection services for the anchors used in working at height services. We achieve this by continuous investment in training and improvement of services delivery.
London Professional Abseiling technicians, install, test, inspect and certify Abseil anchors in accordance with the latest UK regulations.
Eyebolt Safety Systems
Rope Access/Work Positioning Systems are in place for works to be carried out using ropes attached to these eyebolt systems, to enable them to carry out regular work.
The key difference between a Rope Access / Fall Arrest / Fall Restraint System and a /Work Positioning System is obviously the type of usage expected. In both cases, the standard of installation is the same, but the period of inspection availability is one of 6 months for Rope Access installations and the inspection period is 12 months for a Fall Arrest installations.
Abseil – Rope Access Anchor Testing Regulations
Eyebolts can be installed directly into brickwork, concrete, masonry or steelwork and the anchor systems used for eyebolt installations will vary for each structure. The eyebolts themselves, along with the anchor systems, can be made from stainless steel, galvanized or powder coated materials.
There are clear guidelines outlining the need for inspections and the frequency that these must be carried out to remain compliant. With or without documentation, our experienced team can carry out their test and inspections to the latest standards in place. Our inspection engineers take great pride and care in the inspections they complete to ensure original installation guidelines are followed. We will ensure that our/your abseil anchors comply and ensure safety for use.
Abseil Anchors should be inspected and tested at least every six months as per the lifting operations and lifting equipment regulations 1998, (LOLER).
An examination scheme would consist of, but not limited to the following information:
- Eyebolt examination for correct marking
- Inspection of the surrounding structure for any signs of damage or cracks
- Ensuring that the structural anchor is one of an approved type and appropriate to the structure requirements.
- As far as a possible check, that positioning requirements are met.
- Where applicable, physical examination
- Checking that anchor device can be accessed before the user is at risk
- Where is necessary, up-dating of signage as applicable
Following a successful test, a full report detailing our findings would be issued along with certificates for each individual asset.
Abseiling Anchor & Eyebolt Regulation References
BS 7883 2019 | Personal fall protection equipment. Anchor systems. System design, installation, and inspection. Code of practice
BS 8610:2017 | Personal fall protection equipment. Anchor systems. Specification
BS EN 353-1: 2014+A1:2017 | Personal fall protection equipment. Guided type fall arresters including an anchor line. Guided type fall arresters including a rigid anchor line
BS EN795:2012 | Personal fall protection equipment.
BS EN 365:2004 | Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
BS EN 353-2: 2002 | Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line